Marking Plate Type ARP

are distinguished by their dense and even surface texture.

  • Marking plate - section

The special cast iron guarantees a wearproof surface.

Our casting method and ribbing with T-shaped reinforcement struts produces high rigidity against the bending and warping of the plate. Thanks to the various machining processes during manufacture, subsequent buckling of the plate surface can be excluded if mounted properly.

If desired, marking lines or T-slots in accordance with DIN 650 can be applied to the marking plates. Special lateral machining is also possible for the attachment of measuring machines.

Plate Size
approx. mm		 Plate Thickness
approx. mm		 Rib Height
approx. mm		 Plate Height
approx. mm		 Weight
approx. kg		 Number of
Trestles
1500 × 1000 40 175 215 820 5
2000 × 1000 40 205 245 1.120 5
2000 × 1250 50 200 250 1.600 6
2000 × 1500 50 200 250 2.040 5
2000 × 2000 50 200 250 2.530 5
2500 × 1000 50 200 250 1.730 6
2500 × 1250 50 200 250 2.020 6
2500 × 1500 50 200 250 2.470 8
2500 × 2000 50 200 250 3.050 8
3000 × 1000 50 200 250 2.100 6
3000 × 1500 50 250 300 2.980 8
3000 × 2000 50 250 300 3.940 8
3000 × 2500 50 250 300 5.100 9
3000 × 3000 50 300 350 6.190 13
3500 × 1000 50 200 250 2.460 8
3500 × 1500 50 200 250 3.500 11
3500 × 2000 50 250 300 4.630 11
3500 × 2500 50 250 300 5.970 12
4000 × 1000 50 200 250 2.820 8
4000 × 1500 50 200 250 4.000 11
4000 × 2000 50 250 300 5.300 11
4000 × 2500 50 250 300 6.850 12
4000 × 3000 50 300 350 8.320 18
4500 × 1500 50 200 250 4.450 11
4500 × 2000 50 250 300 5850 11
4500 × 2500 50 250 300 7600 12
4500 × 3000 50 300 350 9.200 18
5000 × 1000 50 250 300 3.780 10
5000 × 1500 50 250 300 5.330 14
5000 × 2000 50 250 300 6.540 14
5000 × 2500 50 250 300 8.500 15
5000 × 3000 50 300 350 10.230 23