Box Bracket Type KW
are made from high-density special cast iron
- Box Bracket Type KW
With clamping slits on all four sides, workpieces can be clamped on without any problems. Box brackets are also well suited for use as parallel pieces.
The four surfaces are machined in accordance with DIN 876/III with the two open ends at right angles. Several brackets with the same dimensions can be produced on request.
| No. | Length approx. mm | Width approx. mm | Height approx. mm | Slit width approx. mm | Weight approx. kg |
|---|---|---|---|---|---|
| 1 | 250 | 150 | 100 | 18 | 10 |
| 2 | 300 | 200 | 150 | 18 | 20 |
| 3 | 400 | 250 | 200 | 20 | 50 |
| 4 | 500 | 300 | 250 | 22 | 85 |
| 5 | 600 | 350 | 250 | 22 | 120 |
| 6 | 800 | 500 | 400 | 24 | 400 |
| 7 | 1000 | 600 | 500 | 30 | 600 |
