Clamping Bracket Type WS
Clamping Bracket Type WS
This lightweight clamping bracket is reinforced with two ribs on the back. Thanks to the slits cast in to the clamping and footing area, the bracket can be used on backing plates with completely different slot and hole spacing.
The outer surfaces are machined in accordance with DIN 876 in the various degrees of accuracy, angular accuracy in line with DIN 875.
| No. | 1 | 2 | 3 | 3a | 4 | 5 |
|---|---|---|---|---|---|---|
| A approx. mm | 100 | 150 | 200 | 250 | 300 | 400 |
| B approx. mm | 150 | 200 | 275 | 300 | 400 | 500 |
| C approx. mm | 75 | 100 | 150 | 150 | 225 | 300 |
| Groove width approx. mm | 16 | 16 | 20 | 20 | 20 | 24 |
| Weight approx. kg | 3 | 6 | 12 | 16 | 38 | 75 |
